Highlights:
- Extremely lightweight (65 g incl. batteries)
- Extremely small and handy (L 14.0 cm)
- Battery operated, uses 2x alkaline AAA
- Suitable for use in environments with gas group IIA, B or C (up to T4) or dusts group IIIA, B or C (up to T135°C)
7 years
Get seven years warranty upon registration.
*See our terms and conditions.
As small and handy as a pen but as rugged and most importantly as safe as other lights in the iL series: The Ledlenser iL4. Designed specifically for environments where explosive atmospheres such as flammable gases, vapors or dust clouds can occur for a short period. And yet it’s the cheapest light in the iL series. So not even costs will explode.
show more
show less
Manufacturer:
Ledlenser GmbH & Co. KG
Kronenstraße 5-7 | 42699 Solingen | Germany
www.ledlenser.com
WEEE-Reg-No.: DE 20612570
Ledlenser GmbH & Co. KG
Kronenstraße 5-7 | 42699 Solingen | Germany
www.ledlenser.com
WEEE-Reg-No.: DE 20612570
LED
Beam distance
(in m)
50
Max. Luminous flux
(in lm)
80
CRI
70
Lightsource color temperature
6000 - 7500
Luminous flux
(in lm)
| Power | 80 |
Beamdistance
(in m)
| Power | 50 |
Runtime
(in h)
| Power | 4 |
| Attributes | Power |
|---|---|
| Luminous flux (in lm) | 80 |
| Beamdistance (in m) | 50 |
| Runtime (in h) | 4 |
Power supply
Runtime
(in hours)
4
Rechargeable
No
Battery
Micro (AAA) 1.5V
Case
Dimensions
Length
(in mm)
140
Head diameter
(in mm)
20
Tube diameter
(in mm)
20
Weight
(in g)
65
Material
Materials
PC
Water and dust resistance
IP68
Drop test height
(in m)
1
Working temperature
(in C°)
-20 - 40
specific data for EX-Protection
EX gas zone
2
EX dust zone
22
1 set of batteries (AAA)
*: 7 year warranty only if registered, otherwise 2 years. Warranty conditions viewable at https://ledlenser.com/en/infos-service/warranty/
1: Measured values according to ANSI/PLATO FL 1 in the respective setting named. If no setting is specifically named, the luminous flux (lumens/lm) and range (meters/m) values refer to the brightest setting and the burn time (hours/h) values refer to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time at a time. In case the lamp is equipped with colored LED(s), the measured values are given with white light or the white LED. If the lamp has different energy modes, the "energy saving mode" is the basis for the measurement.
