Information

This product is no longer available. You can still find all information and data on this page. If you have any further questions, our support team will be happy to help you.

Headlamp MH10

MH-Series

Colour

Features

Rear Light

A red rear light on the battery serves as a signaling device so that you can also be reliably seen from behind – e.g. in road traffic or on construction sites, increasing ones safety.
Transportation Lock

The optionally activatable lock function prevents accidental switching on of the light in the backpack or suitcase.

Nr: 501513

7 years

Get seven years warranty upon registration.

*See our terms and conditions.

Ledlenser MH10

The MH10 is the lightest Ledlenser headlamp of its brightness level. It is equipped with a red taillight as well as color filters for various different uses. Perfect for hunters, fishers, hikers and everyone who is looking for extremes outside.

Environmentally friendly – state-of-the-art battery technology
More safety – red rear light
Comfortable – best weight-to-lumen ratio among Ledlenser headlamps
Better near and far vision – swivelling lamp head with infinitely variable focus function
Constant Light Mode – for particularly constant LED power

Manufacturer:
Ledlenser GmbH & Co. KG
Kronenstraße 5-7 | 42699 Solingen | Germany
www.ledlenser.com

WEEE-Reg-No.: DE 20612570

Scope of delivery

USB cable
Pouch
1 set of rechargeable batteries
Filter set

Technical data

LED

Beam distance (in m) ¹	150
Max. Luminous flux (in lm) ¹	600
CRI	65
Lightsource color temperature	6000 - 8000

Attributes	Power	Mid power	Low power
Luminous flux (in lm)	600	250	10
Beamdistance (in m)	150	100	20
Runtime (in h)	10	15	120

1 Measured values according to ANSI/PLATO FL 1 at the respective setting. If no setting is explicitly named, the values for luminous flux (lumen/lm) and luminous range (metres/m) refer to the brightest setting and the values for luminous duration (hours/h) to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time at a time. In case the lamp is equipped with coloured LEDs, the measured values are given with white light or the white LED. If the lamp has different energy modes, the "energy saving mode" is the basis for the measurement.

Power supply