Highlights:
- Magnetic Switch for easy operation with gloves and protective equipment
- Extremely comfortable to carry
- Focusable thanks to Ledlenser patented³ Advanced Focus System
- Dustproof and protected against powerful water jets (IP66 & IP68)
- Red rear light as a position marker
7 years
Get seven years warranty upon registration.
*See our terms and conditions.
This Ledlenser makes it easy to brave any explosive work environment. The iLH8 is not only comfortable to wear, it is also the first headlamp for Ex Zone 2/22 with the patented Advanced Focus System. The iLH8 is approved for gas and dust groups IIC and IIIC in zones 2 and 22 (temperature class T4 / 135°C). This headlamp provides the right light for any situation and absolute safety for short-term explosive atmospheres. So you keep your mind free as well as your hands, leaving you to concentrate fully on your work.
show more
show less
Manufacturer:
Ledlenser GmbH & Co. KG
Kronenstraße 5-7 | 42699 Solingen | Germany
www.ledlenser.com
WEEE-Reg-No.: DE 20612570
Ledlenser GmbH & Co. KG
Kronenstraße 5-7 | 42699 Solingen | Germany
www.ledlenser.com
WEEE-Reg-No.: DE 20612570
LED
Beam distance
(in m)
1
160
Max. Luminous flux
(in lm)
1
280
CRI
65
Lightsource color temperature
6000 - 8000
Luminous flux
(in lm)
| Power | 280 |
| Low power | 60 |
Beamdistance
(in m)
| Power | 160 |
| Low power | 80 |
Runtime
(in h)
| Power | 9 |
| Low power | 38 |
| Attributes | Power | Low power |
|---|---|---|
| Luminous flux (in lm) | 280 | 60 |
| Beamdistance (in m) | 160 | 80 |
| Runtime (in h) | 9 | 38 |
1
Measured values according to ANSI/PLATO FL 1 at the respective setting. If no setting is explicitly named, the values for luminous flux (lumen/lm) and luminous range (metres/m) refer to the brightest setting and the values for luminous duration (hours/h) to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time at a time. In case the lamp is equipped with coloured LEDs, the measured values are given with white light or the white LED. If the lamp has different energy modes, the "energy saving mode" is the basis for the measurement.
Power supply
Runtime
(in hours)
1
38
Rechargeable
No
Battery
2
AA Alkaline 1.5V
1
Measured values according to ANSI/PLATO FL 1 at the respective setting. If no setting is explicitly named, the values for luminous flux (lumen/lm) and luminous range (metres/m) refer to the brightest setting and the values for luminous duration (hours/h) to the lowest setting. A boost function (if available) can be used several times, but is only available for a short time at a time. In case the lamp is equipped with coloured LEDs, the measured values are given with white light or the white LED. If the lamp has different energy modes, the "energy saving mode" is the basis for the measurement.
2
Calculated value of the capacity in watt hours (Wh). This applies to the battery(ies) contained in the delivery condition of the respective item or, in the case of lamps with rechargeable battery, to the rechargeable battery(ies) contained herein in a fully charged condition.
Case
Dimensions
Weight
(in g)
345
Material
Materials
PC
Water and dust resistance
IP68
Drop test height
(in m)
1
Working temperature
(in C°)
-20 - 40
specific data for EX-Protection
EX gas zone
2
EX dust zone
22
Battery cartridge
1 set of batteries (AA)
Features and technologies
-
Rear LightA red rear light on the battery serves as a signaling device so that you can also be reliably seen from behind – e.g. in road traffic or on construction sites, increasing ones safety. -
Advanced Focus SystemOur patented Advanced Focus System (AFS) allows a seamless transition from homogeneous low beam to sharply focused high beam.
