Automonteurs
Craftsman lamps from Ledlenser: inspection lights, torches and headlamps
A high-quality torch is part of every craftsman's basic equipment. You can use it to check components and workpieces, inspect drill holes, shine light into shafts and inspection hatches, and work in the engine compartment or under a vehicle. Make sure it offers good protection against dust and impacts, resistance to chemicals and solvents such as petrol, oil or paint, and a long burn time.
What should tradespeople look for when buying a lamp?
Flashlights provide sufficient illumination in areas where ceiling lighting does not reach. You should consider the following points when choosing the right LED lamp for tradespeople:
- Brightness: The primary function of any lamp is to provide sufficient light. High luminosity is important for LED lamps for tradespeople so that even in the darkest corners, the lighting is sufficient to carry out the work conscientiously. Our powerful LEDs offer you high luminosity for basements, building shells, sanitary facilities or construction sites.
- Robustness: In the everyday work of a tradesperson, the torch is exposed to heavy use. A robust housing is essential. With a shock-resistant housing, you can ensure that the lamp will remain functional even if it falls. If you work outdoors as a craftsman, the LED lamp is also exposed to the weather. For this reason, you should choose a lamp with a dustproof and waterproof housing.
- Ease of use: It is important that craftsman lamps can be operated while wearing work gloves and protective gloves. However, if you need to keep your hands free, a headlamp is the right choice for you. With the necessary accessories, you can also use it as a helmet lamp. For longer illumination of larger basement rooms, building shells, boiler rooms, etc., construction spotlights are suitable, which you can set up or hang up.
- Lighting duration: Ledlenser batteries offer a long lighting duration. When the battery level is running low, you can simply recharge the device and start again at full power. Our Area Lights also shine in hybrid mode. You can operate them via the mains if a power connection is available. However, for outdoor work without a mains connection, for electrical work when the power is off, or for short-term use, you can also conveniently switch to battery power.
- Functions: An adjustable focus ensures that the lamp illuminates even hard-to-reach places optimally and allows you to carry out precise work.
Chemical-resistant craftsman's lamps
No matter how carefully you handle your tools, it is inevitable that glue, paint or varnish will end up on your lamp at some point. The same applies to oil or petrol when working on engines. Some plastics are attacked by these and other solvents over time. Therefore, make sure you choose a resistant housing.
What types of lamps are available for tradespeople?
Inspection lamps, penlights, torches, headlamps and LED construction spotlights are all suitable for use by tradespeople.
Ledlenser craftsman lamps offer a number of advantages:
- High protection against impacts, falls, scratches and chemicals
- Optimised light pattern and natural colour rendering
- Helpful and versatile accessories
- Robust chargers and mounts
- Strong protection against water, dust and dirt
Inspection lights for tradespeople
Inspection lights allow you to check components, drill holes or burrs. They help you to see into shafts, inspection hatches and machines. Depending on the model, they offer attachment options such as magnets, hooks or clips, foldable and rotatable lamp heads, and two different light sources for large-area and spot lighting.
Craftsman's flashlight
With powerful torches ranging from 500 to 4,500 lumens, you can work in factory halls, workshops, and on indoor and outdoor construction sites. We have developed high-quality torches with particularly natural colour rendering especially for professional work. With the right accessories, you can easily attach Ledlenser hand torches to your belt or helmet and lock them in your line of sight so that you have both hands free.
Headlamps for tradespeople
Free hands and good lighting are essential for mechanics and tradespeople. A headlamp gives you maximum freedom, with the light beam always following your head movements. With adapters and accessories, headlamps can also be used as helmet lamps or attached to clothing or belts with a clip.
LED construction spotlights for tradespeople
If you have reliable access to a power socket at your workplace at all times, corded construction spotlights offer you the advantage of full luminosity for a virtually unlimited period of time. However, if this is not the case, such as when working on outdoor construction sites or in shell construction without a power connection, a battery-powered device gives you independence and allows you to continue working.
Penlights for tradespeople
Penlights are particularly slim and fit in practically any pocket. They are suitable for checking components and workpieces, carrying out inspections on machines or engines, or troubleshooting on systems or switch cabinets.
Explosion-proof lamps for tradespeople
The European ATEX directives define the safety features required for lamps used in hazardous areas. With their high luminosity, the ATEX torches and headlamps in the EX and iL series meet the requirements for Ex zones 0, 1, 2, 20, 21 and 22. These lamps allow you to work safely in sawmills, silos and industrial plants.
7-year warranty on your Ledlenser craftsman's lamp
We stand behind the robust workmanship and high quality of our craftsman's lamps with an extended 7-year warranty upon registration. Should any problems arise during this period, we will repair or replace your product free of charge.
We offer secure payment options and fast shipping, as well as personalised service to ensure your complete satisfaction. Ledlenser specialises in high-quality, powerful torches, headlamps, construction spotlights and a wide range of accessories.
Meer toepassingen
Craftsman lamp – Frequently asked questions and answers
Tradespeople mainly use inspection lamps, flashlights, headlamps, penlights, and LED construction spotlights. Each design is tailored to a specific area of application, from detailed work in narrow shafts to large-area illumination. ATEX-certified models are available for potentially explosive areas.
High brightness, robust construction, and good handling are important. The housing should be shockproof, dustproof, waterproof, and resistant to chemicals such as oil, gasoline, and paint. A long burn time and easy operation with work gloves are also important.
For general activities, a light output of 500 lumens or more is sufficient. In halls, building shells, and basements, 1,000 to 4,000 lumens are recommended. For outdoor work, construction spotlights provide over 5,000 lumens.
Many Ledlenser models have magnetic bases, hooks, or clips for attaching to machines, workbenches, or clothing. Headlamps can be mounted with a helmet mount or clip. Construction spotlights have stands, magnetic surfaces, or hangers.
Chemical-resistant housings are resistant to oil, gasoline, solvents, and paints. The material remains stable even with regular contact with operating fluids. This extends the service life of the lamp.