![Two people with headlamps standing in front of a trailor](https://ledlenser.com/media/a0/a1/26/1684463814/FAQ_Header.jpg)
Domande frequenti sull'app Ledlenser
Conosci già le nostre app? Sono personalizzate per i nostri prodotti e consentono di ottenere il massimo delle possibilità. Ledlenser offre due diverse app per controllare alcuni dei nostri prodotti.
Con l'app Ledlenser Connect, potete controllare e personalizzare la vostra luce Ledlenser via Bluetooth®.
(Compatibile con Ledlenser MH11/iH11R, H7R Signature, H19R Signature, Bluetooth® 21700 Li-Ion Batterybox, Bluetooth® 2x 21700 Li-Ion Batterybox, Wireless Remote Control Type A e ML6 Connect WL.)
Scarica Ledlenser Connect App Android
Scarica Ledlenser Connect App Apple
L'app Ledlenser Pro Connect può essere utilizzata per controllare il nostro proiettore da cantiere iF8R.
Il proiettore è fuori portata e volete impostare rapidamente la luce giusta?
Ora potete farlo facilmente tramite il vostro smartphone! Il vostro faretto da cantiere iF8R è dotato di un'interfaccia Bluetooth® 4.2 intelligente a questo scopo.
Download Ledlenser Pro Connect App Android
Download Ledlenser Pro Connect App Apple
- White Light
- Power
- Mid Power
- Low Power
- Individual -> stepless output selection via fader
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected white light output and only for the associated slot.
- Red Light
- Power
- Mid Power
- Low Power
- Individual -> stepless output selection via fader
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected red light output and only for the associated slot.
- Blink (white or red)
- Blink
- Position
- Pulse
- SOS
- Alpine Distress Signal
- By power switch of lamp: Keep pushing the power switch for 8 sec until the red light of the lamp blinks 2x.
- By Ledlenser Connect App: Connect the smartphone/app with the lamp, go to “further functions”, then to “Device settings”and select “Reset” under “Factory Reset”. A warning appears: “Do you really want to restore factory settings? The currently stored switch profile and active timer will be deleted”. Click on “Reset”. The red light of the Lamp will blink 2 x to confirm restoration of the original default factory setting.
- “(((” remote control switch exactly reflects the “+“ switch on the ML6 Connect except for Transportation Lock activation/deactivation. Clicking, double clicking or keep pushing it will cause the same actions.
- “ ⃝” remote control switch exactly reflects the power switch of the ML6 Connect. Except for factory reset, Clicking, double clicking or keep pushing it will cause the same actions: turning on, turning off and cycling through the light functions. Factory reset will not work by using remote control.
- “))” remote control switch exactly reflects the “-” switch of the ML6 Connect except for Transportation Lock activation/deactivation. Clicking, double clicking or keep pushing it will cause the same actions.
- Bluetooth function of ML6 Connect active: When the ML6 Connect is turned on, the ML6 Connect Bluetooth function is active. The lamp can be directly controlled via the remote control. All functions are available with quick reaction time, incl. turning off by keeping pushed “O” switch. When ML6 Connect is operated in Low Power mode at low battery status, the remote control reaction time can be slightly reduced.
- Bluetooth function of ML6 in standby: after turning off the lamp and disconnection from smartphone, the Bluetooth function of the ML6 Connect is set to standby mode for 50 hours. Within this period the lamp can be turned on with slower reaction time by keep pushing “O” switch (thereby reflecting the ML6 Connect power switch) or keep pushing “(((“/”))” switch (thereby reflecting the direct red light activation function of “+“/”-” switch). When the ML6 Connect has been turned on again, reaction time is back to normal.
- Via physical switches: When ML6 Connect is turned off, keep pushing “-” and “+“ switch at the same time until the red main light blinks 4 times quickly will activate Transportation Lock. Keep pushing “-” and “+“ switch at the same time again until the lamp turns on will deactivate Transportation Lock.
- Via app: Go to main menu. Go to “further functions, then to “Device Settings” and select “Transportation Lock”toggle button to on position (-> „red“). Select “Save” at the bottom of the page. Any light function will stop and the red light of the Lamp will blink 2 x to confirm that the new device settings have been sent to the lamp and the activation of the Transportation Lock. To deactivate Transportation Lock select toggle button to off position (-> „white“). The Lamp turns on to confirm deactivation of the Transportation Lock.
- Sufficient battery capacity of the lamp and smartphone (minimum 50% recommended) used for the update process.
- Smartphone with stable internet connection and latest version of the Ledlenser Connect app.
- Enabled Bluetooth function of the smartphone must be enabled until the update process has been completed.
- Smartphone and app must be in close proximity and the Bluetooth connection may not be interrupted until the update process has been completed.
- Smartphone and app must remain switched on until the update process has been completed.
- The app may not be turned off or closed until the update process has been completed.
- Start the app, turn on the lamp and click on “connect”.
- Click on “ok” in the firmware availability notification. Alternatively click on the firmware update icon in the upper right area of the main menu (square chip icon with exclamation mark), then click on “execute” and confirm with “yes”. The update process starts automatically and the red, green and blue LED of the Lamp will turn on shortly after.
- A bar indicates the progress of the firmware update. The update process takes about 5-10 minutes.
- After the firmware update has been completed successfully, a notification will appear and the red, green and blue LED of the Lamp will turn off. App and lamp can now be normally operated again.
- For some smartphone models it may be necessary to restart the app and lamp after the firmware update.
- Under certain conditions a firmware update may not be successfully completed, e.g. when the Bluetooth connection has been interrupted during the update process.
- In some instance, the red, green and blue LED of the Lamp may remain turned on permanently after the update process has been canceled or interrupted until the update has been completed.
- To do the firmware update again and successfully, the update process can be repeated until it is completed.
- In some instance it may be necessary to restart the smartphone and reset the lamp (open and close battery cap) before repeating the firmware update process.
- Constant Light: light output can be selected step less via fading bar. Output is always regarded as percentage of what is possible at that time (depends on heat and battery level).
- Energy Saving: Three preset levels (Power, Mid Power, Low Power).
- Blink: preset blink interval.
- Multicolor light: Red light, green light, blue light.
- Optisense: Adapts light automatically to environmental light conditions.
- Memory function does not work with Direct Control. Once the lamp has been turned off and on again via the physical switch in Direct Control, it will start with the most recent switch profile program that has been sent to the lamp. The light function that has been set via Direct Control before will not be memorized.
- Click on the pen symbol or the text field in the Double Click line and choose from “Not assigned” (no special function, default setting for new switch-profiles), special function “Boost” or special function “Strobe”. With one of the two special functions assigned to Double Click, two quick consecutive clicks on the physical switch of the lamp (<0.5 sec) will activate the special function directly, no matter if any other light function has been active before or the lamp has been switched off (as long as basic mode 1 has been set).
- When no special function has been set for Double Click (=”Not assigned”), quickly using the physical switch of the lamp will allow fast cycling through the individually composed switch profile in basic mode 1.
- When boost is set as special function and activated via double click, it will run for maximum 10 seconds, but it can also be deactivated again by a single click on the physical switch before the 10 seconds have passed by.
- When boost is deactivated, the lamp returns to the light function that has been active before or switch off again.
- When strobe is set as special function and activated via double click, it will keep running until it is deactivated by a single click on the physical switch (no 10 seconds limit).
- When strobe is deactivated, the lamp returns to the light function that has been active before or switch off again.
- Energy Saving
- Power
- Mid Power
- Low Power
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected Energy Saving output mode and only for the associated slot.
- Constant Light
- High
- Middle
- Low
- Individual -> stepless output selection via fader
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected Constant Light output mode and only for the associated slot.
- Blink
- Multicolor Light
- Red
- Green
- Blue
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for the selected multicolor light function and only for the associated slot.
- Optisense
- Interval settings (optional): A preset and stored interval can be added. The interval is valid for Optisense and only for the associated slot.